We manufacture a wide variety of Power Feeds and Blank Tubes. All come with our unconditional guarantee. If there’s something you don’t see here, please give us a call and we can help with a quote, planning, or design.
Power Feed tubes attach to a fixture body and a bottom exit gripper attaches to the top enabling the power cord to enter directly into a fixture below the gripper.
Tube Only
Power Feed and Blank Tubes

PF-1/8-IP
Tube Only
Use MGR-1/8-IP-S mini gripper (not included) or CC-CAP, or CC-1/4X cable coupler
Internally tapped 1/8-IP and externally tapped 1/8-IP
Side entrance for power cord
Mounting nut (LN-1/8-IP not included)
Tube Only. Overall length 1.5″ and outside dia. 0.469″.

PF-1/4-IP
Tube Only
Use MGR-1/8-IP Gripper (not included), or CC-CAP or CC-1/4 X cable coupler
Internally tapped 1/8-IP
Cable exits outs bottom of gripper, cap, or coupler with side entrance for power cord with bottom exit
Mounts in 9/16″ diameter hole
Lower outside diameter is threaded 1/4-IP
Mounting nut ( LN-1/4-IP not included)
Tube Only. Overall length 1.75″ and outside dia. 0.507″.

PF-3/8-IP
Tube Only
Use GR-1/4-IP Gripper ( not included)
Internally tapped 1/4-IP
Cable exits outs bottom of gripper, side entrance for power cord with bottom exit
Mounts in 11/16″ diameter hole
Lower outside diameter is threaded 3/8-IP
Mounting nut ( LN-3/8-IP not included)
Tube Only. Overall length 1.78″ and outside dia. 0.625″.

PF-3/8-IP-SE
Tube Only
Use GR-1/4-IP Gripper (not included)
Internally tapped 1/4-IP
Cable exits outs side of tube, side entrance for power cord with bottom exit
Mounts in 11/16″ diameter hole
Lower outside diameter is threaded 3/8-IP
Mounting nut ( LN-3/8-IP not included)
Tube Only. Overall length 1.78″ and outside dia. 0.625″.

CF-3/8-IP
Tube Only
Internally tapped 1/4-IP
Cord enters from bottom in lieu of the top
For use with C-1/4-IP stem
Lower outside diameter is threaded 3/8-IP
Tube Only

BL-3/8-IP
Blank Tube Only
Internally tapped 1/4-IP
Lower outside diameter is threaded 3/8-IP
Blank Tube Only

A-3/8 X 1/4-20
Adaptor with 3/8-IP internal and 1/4-20 external thread
Adaptor works with GR-3/8-IP-CF and GR-3/8-IP-BL to convert 1/4-20 mounting holes to 3/8-IP Power feed and blank mounting stems
Adaptor with 3/8-IP internal and 1/4-20 external thread

PF-1/2-IP
Tube Only. Use GR-3/8-IP Gripper
Cable exits outs bottom of gripper, side entrance for power cord with bottom exit
Mounts in 7/8″ diameter hole
Internally thread 3/8-IP
Lower outside diameter is threaded 1/2-IP, Mounting nut ( LN-1/2-IP not included)
Tube Only. Overall length 1.78″ and outside dia. 0.79″.

PF-3/4-IP-SE
Tube Only. Use GR-1/2-IP Gripper
Cable exits outs side of tube or bottom
side entrance for power cord with bottom exit
Mounts in 1″ diameter hole. Internally threaded 1/2-IP
Lower outside diameter is threaded 3/4-IP, Mounting nut ( LN-3/4-IP not included)
Tube only. Overall length 2″ and outside dia. 1.04″.
Special Application Gripper

GR-LD
Gripper for 5/64″ and 3/32″ cable, with hidden plunger
Requires special tool to release
Usually mounts in a washer with a .430″ (minimum hole)
for 5/64″ and 3/32″ cable