We carry a wide variety of Cross Cable Grippers. If there is something you don’t see here, please give a call and we can help.
Side Exit Grippers For 3/64″ and 1/16″ cable, with bottom cross cable option.
MGR-SE
1/4-20-BS
Cable exits out the side of gripper
Bottom of gripper slotted for cable pass through and tapped with 1/4-20 allen set screw (included)
Approximately 1-1/4″ height X 3/8″ diameter
For 3/64″ and 1/16″ cable. 1-1/4″ h x 3/8″ dia.
MGR-SE
CHS
Cables exits out both sides of gripper at 45 degrees
Approximately 1-1/4″ height X 3/8″ diameter
Call factory for complete assembly pricing
Requires special cable ends
For 3/64″ and 1/16″ cable. 1-1/4″ h x 3/8″ dia.
MGR-SE
TH
Cable exits out the side of gripper
Plunger is smooth, no safety nut
Bottom of gripper has hole for cable pass through and tapped for M4 allen set screw (included)
Approximately 1-1/4″ height X 3/8″ diameter
For 3/64″ and 1/16″ cable. 1-1/4″ h x 3/8″ dia.
MGR-SE
TH-SN
Cable exits out the side of gripper
Threaded plunger has safety nut
Bottom of gripper has hole for cable pass through and tapped for M4 allen set screw (included)
Approximately 1-1/4″ height X 3/8″ diameter
For 3/64″ and 1/16″ cable. 1-1/4″ h x 3/8″ dia.
MGR-SE
TB
Cable exits out the side of gripper
Bottom of gripper tapered with Phillips set screw on bottom
Cross hole for horizontal 1/16″ cable
Approximately 1-1/4″ height X 3/8″ diameter
For 3/64″ and 1/16″ cable. 1-1/4″ h x 3/8″ dia.
Cable, 1/16″ stainless steel, with #2 1/2 ball ends and captive 1/4-20-knurled thru screws. For use with MGR-SE-1/4-20-BS Gripper or CC-1/16 cross cable coupler.
MGR-SE-TH-C1
Side exit mini gripper with safety nut on plunger
Comes with 1/16″ X 9.5″ cable with a 10/32 bolts, star washers and captive nuts on each end, held with #2 half ball end
1/16″ stainless steel, with #2 1/2 balls ends
MGR-SE-TH-C2
Side exit mini gripper with smooth plunger
Comes with 1/16″ X 9.5″ cable with a 10/32 bolts, star washers and captive nuts on each end, held with #2 half ball end
1/16″ stainless steel, with #2 1/2 balls ends
MGR-SE-TH-C3
Side exit mini gripper with safety nut on plunger
Comes with 1/16″ X 8″ cable with #2 1/2 ball on each end
1/16″ stainless steel, with #2 1/2 balls ends
MGR-SE-TH-C4-8-1/4
Side exit mini gripper with smooth plunger
Comes with captive 1/4-20 X 1/4″ long screws on 8″ cable with #2 1/2 ball ends
1/16″ stainless steel, with #2 1/2 balls ends
MGR-SE-TH-C4-8-1/2
Side exit mini gripper with smooth plunger
Comes with captive 1/2-20 X 1/4″ long screws on 8″ cable with #2 1/2 ball ends
1/16″ stainless steel, with #2 1/2 balls ends
MGR-SE-TH-C4-13-1/4
Side exit mini gripper with smooth plunger
Comes with captive 1/4-20 X 1/4″ long screws on 13″ cable with #2 1/2 ball ends
1/16″ stainless steel, with #2 1/2 balls ends
MGR-SE-TH-C4-13-1/2
Side exit mini gripper with smooth plunger
Comes with captive 1/4-20 X 1/2″ long screws on 13″ cable with #2 1/2 ball ends
1/16″ stainless steel, with #2 1/2 balls ends
MGR-SE-TH-C5-5
Side exit mini gripper with smooth plunger
Cross cable is 5″ long with die cast mushroom ends (#5)
1/16″ stainless steel, with #2 1/2 balls ends
MGR-SE-TH-C6-18-1/4
Side exit mini gripper with safety nut on plunger
Comes with captive 1/4-20 X 1/4″ long screws on 3/64 x 18″ cable with #2 1/2 ball ends
1/16″ stainless steel, with #2 1/2 balls ends
Cable, 1/16″ stainless steel, with #2 1/2 ball ends and captive 1/4-20-knurled thru screws. For use with MGR-SE-1/4-20-BS Gripper or CC-1/16 cross cable coupler.
C-1/16-8-BH-1/4
Cable, 1/16 X 8″, with 2 each BH-1/4-20-1/4″ long, captive with #2 1/2 ball ends
C-1/16-8-BH-1/2
Cable, 1/16 X 8″, with 2 each BH-1/4-20-1/2″ long, captive with #2 1/2 ball ends.
C-1/16-12-BH-1/4
Cable, 1/16 X 12″, with 2 each BH-1/4-20-1/4″ long, captive with #2 1/2 ball ends.
C-1/16-12-BH-1/2
Cable, 1/16 X 12″, with 2 each BH-1/4-20-1/2″ long, captive with #2 1/2 ball ends.
C-1/16-18-BH-1/4
Cable, 1/16 X 18″, with 2 each BH-1/4-20-1/4″ long, captive with #2 1/2 ball ends.
C-1/16-18-BH-1/2
Cable, 1/16 X 18″, with 2 each BH-1/4-20-1/2″ long, captive with #2 1/2 ball ends.
C-1/16-24-BH-1/4
Cable, 1/16 X 24″, with 2 each BH-1/4-20-1/4″ long, captive with #2 1/2 ball ends.
C-1/16-24-BH-1/2
Cable, 1/16 X 24″, with 2 each BH-1/4-20-1/2″ long, captive with #2 1/2 ball ends.
