Power Feeds

Power Feed and Blank Tubes

cable grippers
PF-1/8-IP
cable grippers
PF-1/4-IP
cable grippers
PF-3/8-IP
cable grippers
PF-3/8-IP-SE
cable grippers
CF-3/8-IP
cable grippers
BL-3/8-IP
cable grippers
A-3/8 X 1/4-20
cable grippers
PF-1/2-IP
cable grippers
PF-3/4-IP-SE

Special Application Gripper

cable grippers
GR-LD

 
 
 
 
 
 
 
 
 
 
 
 
 

cable grippers
PF-1/8-IP
Tube Only. Use MGR-1/8-IP-S mini gripper (not included) or CC-CAP, or CC-1/4X cable coupler. Internally tapped 1/8-IP and externally tapped 1/8-IP. Side entrance for power cord. Mounting nut (LN-1/8-IP not included)
Download PDF
cable grippers
PF-1/4-IP
Tube Only. Use MGR-1/8-IP Gripper (not included), or CC-CAP or CC-1/4 X cable coupler. Internally tapped 1/8-IP. Cable exits outs bottom of gripper, cap, or coupler with side entrance for power cord with bottom exit. Mounts in 9/16" diameter hole. Lower outside diameter is threaded 1/4-IP. Mounting nut ( LN-1/4-IP not included).
Download PDF
cable grippers
PF-3/8-IP
Tube Only. Use GR-1/4-IP Gripper ( not included) . Internally tapped 1/4-IP. Cable exits outs bottom of gripper, side entrance for power cord with bottom exit. Mounts in 11/16" diameter hole. Lower outside diameter is threaded 3/8-IP. Mounting nut ( LN-3/8-IP not included).
Download PDF
cable grippers
PF-3/8-IP-SE
Tube Only. Use GR-1/4-IP Gripper (not included) . Internally tapped 1/4-IP. Cable exits outs side of tube, side entrance for power cord with bottom exit. Mounts in 11/16" diameter hole. Lower outside diameter is threaded 3/8-IP. Mounting nut ( LN-3/8-IP not included).
Download PDF
cable grippers
CF-3/8-IP
Tube Only. Internally tapped 1/4-IP. Cord enters from bottom in lieu of the top. For use with C-1/4-IP stem. Lower outside diameter is threaded 3/8-IP.
Download PDF
cable grippers
BL-3/8-IP
Blank Tube Only. Internally tapped 1/4-IP. Lower outside diameter is threaded 3/8-IP.
Download PDF
cable grippers
A-3/8 X 1/4-20
Adaptor with 3/8-IP internal and 1/4-20 external thread. Adaptor works with GR-3/8-IP-CF and GR-3/8-IP-BL to convert 1/4-20 mounting holes to 3/8-IP Power feed and blank mounting stems.
Download PDF
cable grippers
PF-1/2-IP
Tube Only. Use GR-3/8-IP Gripper. Cable exits outs bottom of gripper, side entrance for power cord with bottom exit. Mounts in 7/8" diameter hole. Internally thread 3/8-IP. Lower outside diameter is threaded 1/2-IP, Mounting nut ( LN-1/2-IP not included).
Download PDF
cable grippers
PF-3/4-IP-SE
Tube Only. Use GR-1/2-IP Gripper. Cable exits outs side of tube or bottom. side entrance for power cord with bottom exit. Mounts in 1" diameter hole. Internally threaded 1/2-IP. Lower outside diameter is threaded 3/4-IP, Mounting nut ( LN-3/4-IP not included).
Download PDF
cable grippers
GR-LD
Gripper for 5/64" and 3/32" cable, with hidden plunger. Requires special tool to release. Usually mounts in a washer with a .430" (minimum hole).
Download PDF