Cables

Cut cable lengths with diecast stops and fuse cut ends

Cable grippers can supply any style or length of pre cut cable. The die cast stops offer the strongest support and security as the cable separated to hold the in the cast stop. Fuse cut cable ends ensure that the cables slide into grippers smoothly and the ends do not fray. The small added cost of supplying pre-cut cables far outweighs the difficulties faced when cables must be cut by hand and the risk of an insecure pressed on stop.

 
 
 
 
 
 
 
 

 

Understanding Cable Construction

Please Note...3/16 or 3/17 stainless steel cable is recommended for areas where moisture is present. Galvanized cable is not recommended for areas where moisture is present.

7 x 7 is the recommended construction, combining strength with flexibility. Compare the the following which are standard constructions commonly available.

Strand

1x3: A simple construction of three single wires twisted together. This construction makes it a very flexible strand in small diameters. The strand becomes less flexible as diameters increase.

1x7: Six wires are laid around one center wire. This strand is more flexible than a 1x3. This construction is commonly used for push-pull applications and for conductive needs with low flexibility.

1x19: Twelve wires are laid around a 1x7 center. This construction is used for more flexible needs than a 1x7 in push-pull and conductive applications. A 1x19 strand is almost as high a breaking strength as a 1x7 strand with the same diameter.

Cable

3x7: A combination of three 1x7 strands twisted together. This is a very flexible cable in small diameters.

7x3: Six 1x3 strands cabled around a 1x3 center strand. The properties of this cable are the same as a 3x7 cable but is a much smoother cable on the outside. This cable is used for application requiring a smooth jacket but it is more costly than a 3x7 cable.

7x7: Six 1x7 outside strands are cabled around a 1x7 strand center. This is the most standard cable construction. This produces a very flexible cable with good cycle life and excellent breaking strength.

7x19: Six 1x19 strands are cabled around a 1x19 center strand. This is the most flexible standard construction for cable. This cable gives you a high cycle life but has a lower breaking strength and is more costly than a 7x7 cable.

 
 
 
 
 
 
 
 
 
 
 
 
 

cable grippers

Cable, 3/64" with fuse cut and #1 die cast end

C-3/64-24-SS
Cable, stainless steel, 3/64 X 24" with stop
C-3/64-36-SS
Cable, stainless steel, 3/64 X 36" with stop
C-3/64-50-SS
Cable, stainless steel, 3/64 X 50" with stop
C-3/64-72-SS
Cable, stainless steel, 3/64 X 72" with stop
C-3/64-100-SS
Cable, stainless steel, 3/64 X 100" with stop
C-3/64-120-SS
Cable, stainless steel, 3/64 X 120" with stop
C-3/64-150-SS
Cable, stainless steel, 3/64 X 150" with stop

Cable, 1/16" with fuse cut and #1 die cast end

C-1/16-12-SS
Cable, stainless steel, 1/16" X 12" with stop
C-1/16-18-SS
Cable, stainless steel, 1/16" X 18" with stop
C-1/16-24-SS
Cable, stainless steel, 1/16" X 24" with stop
C-1/16-36-SS
Cable, stainless steel, 1/16" X 36" with stop
C-1/16-50-SS
Cable, stainless steel, 1/16" X 50" with stop
C-1/16-72-SS
Cable, stainless steel, 1/16" X 72" with stop
C-1/16-100-SS
Cable, stainless steel, 1/16" X 100" with stop
C-1/16-120-SS
Cable, stainless steel, 1/16" X 120" with stop
C-1/16-150-SS
Cable, stainless steel, 1/16" X 150" with stop
C-1/16-200-SS
Cable, stainless steel, 1/16" X 200" with stop
C-1/16-250-SS
Cable, stainless steel, 1/16" X 250" with stop
C-1/16-300-SS
Cable, stainless steel, 1/16" X 300" with stop
C-1/16-350-SS
Cable, stainless steel, 1/16" X 350" with stop

Cable, 5/64" with fuse cut and #1 die cast end

C-5/64-36-SS
Cable, stainless steel, 5/64" X 36" with stop
C-5/64-50-SS
Cable, stainless steel, 5/64" X 50" with stop
C-5/64-72-SS
Cable, stainless steel, 5/64" X 72" with stop
C-5/64-120-SS
Cable, stainless steel, 5/64" X 120" with stop
C-5/64-150-SS
Cable, stainless steel, 5/65" X 150" with stop
C-5/64-250-SS
Cable, stainless steel, 5/64" X 250" with stop

Cable, 3/32" with fuse cut and #1 die cast end

C-3/32-24-SS
Cable, stainless steel, 3/32" X 24" with stop
C-3/32-36-SS
Cable, stainless steel, 3/32" X 36" with stop
C-3/32-50-SS
Cable, stainless steel, 3/32" X 50" with stop
C-3/32-72-SS
Cable, stainless steel, 3/32" X 72" with stop
C-3/32-100-SS
Cable, stainless steel, 3/32" X 100" with stop
C-3/32-120-SS
Cable, stainless steel, 3/32" X 120" with stop
C-3/32-150-SS
Cable, stainless steel, 3/32" X 150" with stop
C-3/32-200-SS
Cable, stainless steel, 3/32" X 200" with stop
C-3/32-250-SS
Cable, stainless steel, 3/32" X 250" with stop
C-3/32-300-SS
Cable, stainless steel, 3/32" X 300" with stop

Download PDF

cable grippers

Cable with die cast end #2 1/2 ball on both ends

C-1/16-6-2-ENDS
Cable, 1/16 X 6" length, with #2 1/2 ball ends.
C-1/16-12-ENDS
Cable, 1/16 X 12" length, with #2 1/2 ball ends.
C-1/16-18-2-ENDS
Cable, 1/16 X 18" length, with #2 1/2 ball ends.

Cable with #2 1/2 ball end and fuse cut

C-3/64-36-1/2-SB
Cable, 3/64 X 36" length. #2 1/2 ball end with fuse cut. For use with multiple cable couplers.
C-3/64-72-1/2-SB
Cable, 3/64 X 72" length. #2 1/2 ball end with fuse cut. For use with multiple cable couplers.
C-3/64-100-1/2-SB
Cable, 3/64 X 100" length. #2 1/2 ball end with fuse cut. For use with multiple cable couplers.

Download PDF

cable grippers

Cable, CC-1/4-20 on one end and a #3 die cast eye

C-1/16-3-EYE-CC
Cable, 1/16" diameter , 3" length with CC-1/4-20 cable coupler and die cast eye #3.
C-3/32-4.5-EYE-CC-1/4-20
Cable, 3/32" diameter , 4.5" length with CC-1/4-20 cable coupler and die cast eye #4.

Cables with die cast eyes stop #3

C-3/64-24-EYE
Cable, 3/64 X 24". Die cast eye end # 3 with fuse cut.
C-3/64-72-EYE
Cable, 3/64 X 72". Die cast eye end # 3 with fuse cut.
C-3/64-120-EYE
Cable, 3/64 X 120". Die cast eye end # 3 with fuse cut.
C-1/16-8.5-EYE
Cable, 1/16" X 8.5" length with die cast eye ends # 3. Used as safety cable.
C-1/16-12-EYE
Cable, 1/16" X 12" length with die cast eye ends # 3. Used as safety cable.
C-1/16-24-EYE
Cable, 1/16" X 24" length with die cast eye ends # 3. Used as safety cable.

Download PDF

cable grippers

Cables with die cast eyes stop #4

C-3/32-50-2-EYE
Cable, 3/32" X 50" length with 2 each die cast eye ends # 4. Used as safety cable.

Download PDF

cable grippers

Diecast mushroom stop #5

Download PDF